Set the switch according to the following ta-
ble.
CAUTION
l
Always perform adjustments before driving.
Do not attempt to adjust while driving, as it
could cause an accident.
2 - person seat
Vehicle condition Switch posi-
tion
“0”
“3”
●:1 person
:Full luggage loading
Switch position 0- Driver only
Switch position 3- Driver + Full luggage
loading
5 - person seat
Vehicle condition Switch posi-
tion
“0”
“0”
“1”
“2” or “3”
“3” or “4”
●:1 person
:Full luggage loading
Switch position
0-
Driver only/Driver + 1
front passenger
Switch position
1-
5 passengers (including
driver)
Switch position
2-
5 passengers (including
driver) + Full luggage
loading {Vehicles equip-
ped with CVT (except
2400 models)}
Switch position
3-
5 passengers (including
driver) + Full luggage
loading {Except for vehi-
cles equipped with CVT
(except 2400 models)} /
Driver + Full luggage
loading {Except for 2WD
vehicles equipped with
M/T}
Switch position
4-
Driver + Full luggage
loading {2WD vehicles
equipped with M/T}
Headlamp levelling
5-60
OGFE16E1
Instruments and controls
5
To Next Page
Loading...
