Stop the engine immediately and contact
a MITSUBISHI MOTORS Authorized
Service Point for assistance.
*: Front of the vehicle
WARNING
l
Be careful not to get your hands or clothes
caught in the cooling fan.
4. Check the coolant level in the reserve
tank (B).
*: Front of the vehicle
5. Add coolant to the radiator and/or re-
serve tank if necessary. (Refer to the
“Maintenance” section.)
WARNING
l
Make sure that the engine has cooled
down before removing the radiator cap
(C), because hot steam or boiling water
otherwise will gush from the filler port
and may scald you.
CAUTION
l
Do not add coolant while the engine is hot.
Suddenly adding cold coolant could damage
the engine. Wait for the engine to cool
down, then add coolant a little at a time.
6. Examine the radiator hoses for coolant
leakage and the drive belt for looseness
or damage.
If there is anything wrong with the cool-
ing system or drive belt, we recommend
you to have it checked and repaired.
Tools and jack
E00800901382
Storage
The tools and jack are stowed on the right
side of the luggage area.
The storage location of the tools and jack
should be remembered in case of an emer-
gency.
1- Tools
2- Jack
Tools and jack
8-05
OGFE16E1
For emergencies
8
To Next Page
Loading...
