To adjust the vertical mirror
position
It is possible to move the mirror up and down
to adjust its position.
To adjust the mirror position
It is possible to move the mirror up/down and
left/right to adjust its position.
To reduce the glare
Type 1
The lever (A) at the bottom of the mirror can
be used to adjust the mirror to reduce the
glare from the headlamps of vehicles behind
you during night driving.
1- Normal
2- Anti-glare
Type 2
When the headlamps of the vehicles behind
you are very bright, the reflection factor of
the rear-view mirror is automatically changed
to reduce the glare.
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the reflection factor of the mirror is au-
tomatically changed.
NOTE
l
Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
Inside rear-view mirror
6-09
OGFE16E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
