CAUTION
l
Driving on dry, paved roads in “4WD
LOCK” mode causes increased fuel con-
sumption and noise
NOTE
l
The drive mode can be switched while driv-
ing or stopped.
Drive mode indicator
Normally the indicator illuminates when the
ignition switch is turned to the “ON” position
or the operation mode put in ON, and then
the drive mode is displayed a few seconds af-
ter the engine is started.
The status of each drive mode display is as
follows.
Drive mode
Drive mode indicator
colour liquid
crystal dis-
play meter
mono-colour
liquid crys-
tal display
meter
4WD ECO 4WD ECO 4WD-E
4WD AUTO 4WD AUTO —
4WD LOCK 4WD LOCK LOCK
On vehicles with colour liquid crystal display
meter, the drive mode is displayed as an in-
terrupt display on the information screen in
the multi information display when the drive
mode is switched.
After a few seconds, the information screen
returns from the drive mode display to the
previous screen.
Drive mode Display
4WD ECO
4WD AUTO
4WD LOCK
CAUTION
l
If the selected drive mode indicator is blink-
ing, the drive mode switches automatically
to protect the drive-system components.
The warning display is also displayed in the
information screen in the multi information
display.
Warning display (colour liquid crystal dis-
play)
Reduce speed, and if the indicator goes out
after driving a while, resume driving as be-
fore.
For vehicles equipped with mono-colour liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking alter-
nately.
Electronically controlled 4WD system*
6-52
OGFE16E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
