CAUTION
l
Do not allow any person to get on the plastic
cover (B), and do not place luggage on it.
Doing so could damage cover.
7. Pull up the lever (C), then fold the seat-
back forward.
CAUTION
l
Do not allow any person to sit on the flipped
seat cushion, and do not place luggage on it.
The seat’s mounting fittings could bend un-
der the weight, making it impossible for the
seat to be retained on the vehicle.
NOTE
l
When folding the second seatback forward
once, the seat automatically switch from the
luggage area mode to the walk-in mode.
To return
1. Raise the seatback until it locks securely
into place.
2. On vehicles with the third seats, make
sure that the lever is at the walk-in mode
position.
Otherwise, move the lever to the walk-in
mode position.
3. While lifting the seat belt’s buckle (A),
gently lower the seat cushion. Make sure
that there is a hook (B) at the position
shown in the illustration.
4. Push down the seat cushion until it locks
into place.
Making a luggage area
4-09
OGFE16E1
Seats and seat belts
4
To Next Page
Loading...
Need help?
General
