Switch position 0- Driver only/Driver + 1 front
passenger
Switch position 1- 5 passengers (including driv-
er)
Switch position 2- 5 passengers (including driv-
er) + Full luggage loading
{Vehicles without heavy duty
suspension}
/Driver + full luggage load-
ing {Vehicles without heavy
duty suspension (4WD)}
Switch position 3- 5 passengers (including driv-
er) + Full luggage loading
{Vehicles with heavy duty
suspension}
/Driver + full luggage load-
ing {Vehicles without heavy
duty suspension (2WD)}
/Driver + full luggage load-
ing {Vehicles with heavy du-
ty suspension}
Switch position 4- Driver + full luggage loading
{Vehicles with heavy duty
suspension and high ground
clearance suspension}
7 - person seat
Vehi-
cle
con-
dition
Switc
h po-
sition
“0” “0” “1” “2” “3”
“3”
or“4”
●: 1 person
: Full luggage loading
Switch position 0- Driver only/Driver + 1 front
passenger
Switch position 1- Driver + 1 front passenger +
2 passengers on third seat
Switch position 2- 7 passengers (including driv-
er)
Switch position 3- 7 passengers (including driv-
er) + Full luggage loading
/Driver + full luggage load-
ing {Vehicles without high
ground clearance suspension}
Switch position 4- Driver + full luggage loading
{Vehicles with high ground
clearance suspension}
Automatic headlamp levelling (vehi-
cles with discharge headlamps)
E00517600336
This mechanism automatically adjusts the direction
of the headlamps (beam position) depending on
changes in the condition of the vehicle, such as the
number of occupants or luggage weight. When the
headlamps are illuminated with the ignition switch
in the “ON” position, the beam position of the head-
lamps is automatically adjusted when the vehicle is
stopped.
Headlamp automatic levelling system warning dis-
play
Type 1
Type 2
If there is a fault in the automatic headlamp level-
ling system, the warning display is displayed on
the information screen in the multi-information dis-
play.
CAUTION
l
If a warning is displayed, the system may
be malfunctioning, so we recommend you
to have your vehicle inspected.
Instruments and controls
3-47
3