USB input terminal*
E00761900015
You can connect your USB memory device or iPod
to play music files stored in the USB memory de-
vice or iPod.
The following explains how to connect and remove
a USB memory device or iPod.
Refer to the following sections for details on how
to play music files:
Refer to “To play from a USB memory device” on
page 5-46.
*: “iPod” is a registered trademark of Apple Inc. in
the United States and other countries.
How to connect a USB memory device
E00762000172
1. Park your vehicle in a safe place and turn the
ignition switch to the “LOCK” position.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the connector cable (C) to the USB
memory device (B).
4. Connect the connector cable (C) to the USB
input terminal (D).
CAUTION
l
Keep the lid of the floor console box
closed while driving the vehicle. A lid or
the contents of the floor console box
could otherwise cause injuries.
NOTE
l
Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
l
When closing the floor console box, be care-
ful not to trap the connector cable.
5. To remove the connector cable, turn the igni-
tion switch to the “LOCK” position first and
perform the installation steps in reverse.
How to connect an iPod
E00762100030
1. Park your vehicle in a safe place and turn the
ignition switch to the “LOCK” position.
2. Open the USB input terminal cover (A) in
the floor console box.
For pleasant driving
5-80
5