EasyManuals Logo

Mitsubishi OUTLANDER Owner's Manual

Mitsubishi OUTLANDER
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
CAUTION
l
Be sure to use tyres of the same type and
size on 4 wheels.
If tyre types or sizes are mixed, ABS may
not function normally.
l
Never install a limited-slip differential,
which is not MITSUBISHI genuine parts,
as the ABS may not function normally.
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
ABS warning lamp/display
E00607201018
Warning lamp
Warning display type 1
Warning display type 2
If there is a malfunction in the system, the ABS
warning lamp will come on and the warning dis-
play will appear on the information screen in the
multi-information display.
Under normal conditions, the ABS warning lamp
only comes on when the ignition switch is turned
to the “ON” position and goes off a few seconds later.
CAUTION
l
Any of the following warning lamp/dis-
play behavior indicates that the ABS is
not functioning and only the standard
brake system is working. (The standard
brake system is functioning normally.) If
this happens, take your vehicle to a
MITSUBISHI MOTORS Authorized
Service Point.
When the ignition switch is in the
“ON” position, the warning lamp does
not come on or it remains on and does
not go off
The warning lamp comes on while driv-
ing
The warning display appears while
driving
If the warning lamp/display illuminate
while driving
E00607301181
If only the ABS warning lamp/display illuminate
Avoid hard braking and high-speed driving. Stop
the vehicle in a safe place.
Restart the engine and check to see whether the
lamp goes out after a few minutes driving; if it then
remains off during driving, there is no problem.
However, if the lamp does not go out, or if it lights
up again when the vehicle is driven, we recom-
mend you to have the vehicle checked as soon as
possible.
If the ABS warning lamp/display and brake warn-
ing lamp/display illuminate at the same time
Warning lamp
Warning display type 1
Warning display type 2
The ABS and brake force distribution function may
not work, so hard braking could make the vehicle
unstable.
Avoid hard braking and high-speed driving. Stop
the vehicle in a safe place and we recommend you
to have the vehicle checked.
Starting and driving
4-56
4

Table of Contents

Other manuals for Mitsubishi OUTLANDER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi OUTLANDER and is the answer not in the manual?

Mitsubishi OUTLANDER Specifications

General IconGeneral
BrandMitsubishi
ModelOUTLANDER
CategoryAutomobile
LanguageEnglish

Related product manuals