To listen to a CD
E00709601886
1. Insert disc with label facing up.
When a disc is inserted, the CD indicator
(16) will come on and the CD player will be-
gin playing even if the radio is being used.
The CD player will also start playback when
the CD button (2) is pressed with a disc in
the player or with a disc set in the CD inser-
tion slot (12), even if the radio is being used.
2. To stop the CD, turn off the power by press-
ing the PWR switch (3) or change over to ra-
dio mode by pressing the AM/FM button (1),
or eject the disc by pressing the eject button
(11).
NOTE
l
To adjust the volume and tone, refer to “To
adjust the volume” on page 5-10 and “To ad-
just the tone” on page 5-10.
l
When an 8 cm compact disc is used, the adapt-
er is not needed for playback. Insert the disc
in the centre of the disc-loading slot.
l
For information concerning the handling of
compact discs, refer to “Handling of compact
discs” on page 5-60.
To listen to a music CD
Push the CD button (2) if a disc is already in the
CD player. The audio system will enter CD mode
and start playback. The track number and the play-
ing-time will appear on the display. The tracks in
the disc will be played consecutively and continu-
ously.
To listen to an MP3 CD
This CD player allows you to play MP3 (MPEG Au-
dio Layer-3) files recorded on CD-ROMs, CD-Rs
(recordable CDs), and CD-RWs (rewritable CDs)
in ISO9660 Level 1/Level 2, Joliet, and Romeo for-
mats. Each disc can hold up to 255 files in up to
100 folders, up to a maximum of 16 levels. The
ID3 tag information can be displayed during MP3
playback. For information concerning ID3 tags, re-
fer to “CD text and MP3 title display” on page
5-22.
Push the CD button (2) if a disc is already in the
CD player.
The display shows “READING”, then playback
will begin. The folder number, the track number,
the playing-time and “MP3” indicator will appear
on the display.
For pleasant driving
5-20
5
To Next Page
Loading...
Need help?
General
