Except on vehicles with a T155/90D16 size spare
wheel
1. Put the tyre on the spare tyre hanger with the
wheel surface facing downwards.
2. Install the chain on the spare tyre hanger.
3. Open the lower gate. Refer to “Split tailgate:
To open” on page 1-31.
4. Turn the wheel nut wrench until the tyre is se-
cure and the chain is tight. Do not over tighten.
CAUTION
l
After storing the spare wheel, check that
the spare tyre hanger is securely locked
in place.
If the spare tyre hanger is not securely
locked in place, it could come loose and
fall while you are driving and cause an ac-
cident.
NOTE
l
Overtightening the nut can damage the gear,
resulting in the gear not winding up the chain.
5. Install the cover (A).
To store the tools and jack
E00803800037
Reverse the removing procedure when storing the
jack, jack bar and wheel nut wrench.
Refer to “Tools and jack” on page 6-08.
For emergencies
6-17
6
To Next Page
Loading...
Need help?
General
