Mitsubishi Q00JCPU - Page 613

9
PARAMETERS
9.3 Network Parameters
9 - 39
9
Parameters
10
Device Explanation
11
CPU Module Processing Time
12
Procedure for Writing Program to CPU ModuleAppendicesIndex
(4) CC-Link setting
The network parameter of the CC-Link is set.
* 1 : Can be set only when the High Performance model QCPU or Process CPU is used.
(Continued on next page)
Figure 9.30 Network parameters Setting the CC-Link list
Table9.34 Network parameters Setting the CC-Link list
Item Parameter No. Description Setting range Default value Reference
Number of CC-Link C000H
Set the CC-Link parameters. Refer to the CC-Link Manual. ---- ----
Starting I/O No.
CNM2
HOperational settings
All connect count
Remote input (RX)
CNM1
H
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
Ver. 2 remote input
(RX)
*1
Ver. 2 remote output
(RY)
*1
Ver. 2 remote register
(RWr)
*1
Ver. 2 remote register
(RWw)
*1