Mitsubishi Q02HCPU User Manual

9 - 24
9.1 PLC Parameters
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
9
PARAMETERS
(8) Boot file
Make the settings to execute boot run and automatic write to standard ROM
Note9.2
.
Note1
Figure 9.19 Boot file
Note1
Table9.20 Boot file setting list
Item Parameter No. Description Setting range Default value Reference
Boot option
Clear
program
memory
7000
H
Set whether the program
memory will be cleared or not at
boot.
Do not clear/Clear program
memory at boot
Do not clear
program memory at
boot
Section 5.2.8
Section 5.2.9
Auto
Download
all Data
from
Memory
card to
Standard
ROM
Set whether the memory card
data will be automatically written
to the standard ROM or not at a
boot.
Do not perform/Perform
automatic all data write from
memory card to standard ROM
Do not perform
automatic all data
write from memory
card to standard
ROM
Boot file setting
Set the type, data name and
transfer source drive of the boot-
run file.
Type, data name, transfer source
drive (transfer source drive is
automatically set by the program
memory)
No setting
Universal
UD
Note9.2
Automatic write to standard ROM is not available for the Universal model QCPU.
Universal
UD
Note9.2

Mitsubishi Q02HCPU Specifications

General

Brand	Mitsubishi
Model	Q02HCPU
Category	Controller
Language	English