Mitsubishi Q12HCPU Manual

1 System Structure
2
Supported Device Addresses
3 Consecutive Device Addresses
4 Environment Setup
5 I/O Manager Configuration
6 Driver Configuration
7 Protocol Configuration
8 Device Address Configuration
Mitsubishi Electric
Melsec-Q
Ethernet (UDP) Driver
• This manual explains how to connect the target machine with other manufacturer devices. For
information about how to use the Pro-Designer software, please refer to the Pro-Designer Online
Help.
• The types of target machines that are compatible with Pro-Designer depends on the version of
Pro-Designer. For information about the compatibility of target machines, please refer to the
Pro-Designer Online Help.
© 2002 Digital Electronics Corporation. All rights reserved.

Mitsubishi Q12HCPU Specifications

General

Manufacturer	Mitsubishi
Number of Simultaneously Executable Programs	Up to 8
Number of PCMCIA Card Slots	1
Built-in Ethernet Ports	1
Built-in RS-232 Ports	1
Built-in USB Ports	1
Operating Temperature	0 to 55 °C
Storage Temperature	-25 to 75°C
Number of I/O Points	4096
Data Memory Capacity	256K bytes
Total Device Points	8192 points
Humidity	5 to 95% RH (non-condensing)
Vibration Resistance	10 to 57 Hz
Shock Resistance	147 m/s², 3 times in each of X, Y, and Z directions