1 - 25
MELSEC-Q
1 PRODUCT OUTLINE
Setting method
: Indicates the PLC program that must be created.
<GX Developer>
<GX Developer>
PLC
CPU
QD75
<GX Configurator-QP>
<GX Developer>
Set with peripheral S/W
Write
Write
Set the parameter and data for executing main function,
and the sub functions that need to be set beforehand.
When set with "GX Configurator-QP",
this does not need to be created.
Write
Create sequence program
for setting data
Create sequence program for
executing main function
Create sequence program for
outputting control signals, such
as start signal, to QD75.
Operation sequence program
Write
PLC
CPU
Create a sequence
program for the
sub functions.
· Speed change
· Current value changing
· Torque limit
· Restart, etc.
To Next Page
Loading...