12 - 43
MELSEC-Q
12 CONTROL SUB FUNCTIONS
(3) Add the following sequence program to the control program, and write it to
the PLC CPU.
External command
valid signal
(QD75 starts speed change processing.)
[Speed change processing]
<Write the new speed. >
K1D108K1514H0DTOP
K1K1K1505H0TOP
<Set the external command signal input
to valid.>
K1
K1K62
H0TOP
Input the external command signal.
<Set the external command function
selection to external speed change
request. >
Write 1000000 to D108 and D109.
Example
To Next Page
Loading...
Need help?
General
