–8–
AUTO HI MED LO ULO
• When changing FAN SPEED from HI to LO, the sound
of refrigerant flowing may be heard.
NOTE
Temperature adjustment during AUTO
■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or
the
button.During automatic operation, 24°C is preset both for heating and cooling.
AUTO mode operation
■
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
1
When a change in temperature is required.
Press the or button.
• If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
Page 9
• Airflow direction adjustment procedure.
Page 10
AUTO mode can be
operated by simply
pressing the ON/
OFF button.
To stop: Press the ON/OFF button.
■ Each time the button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the button is pressed, the indicator does not
change.
■ Each time the button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the button is pressed, the indicator does not change.
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
Point the remote control toward the air-conditioner, and
Press the ON/OFF button.
1
2
When it is a little cold
Press the
button.
When it is a little hot
Press the
button.
FAN SPEED
Press the FAN SPEED button.
Move the [
mark] to the preferred fan speed position.
■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
NOTE
Display in OFF status
• The current time and preset
OPERATION MODE are displayed
while the air conditioner is turned
off.
Remote Control display
-6 -5 -4 -3 -2 -1
+
0+1 +2+3 +4+5+6
18 19 20 21 22 23 24 25 26 27 28 29 30
Setting
temp.(°
C
)
Operation capacity by your choice FAN SPEED
Set automatically by microcomputer AUTO
Powerful operation with high capacity HI
Standard operation MED
Energy-saving operation LO
Silent operation ULO
• In case air is not blowing out
during the operation.
Page 19
• When the included clean filter is
installed the air conditioner will
clean the air during automatic
operation.
RKW012A401B_EN_001-022 12/08/2010, 13:578
To Next Page
Loading...
Need help?
General
