–14–
HIGH POWER/ECONOMY operation
2
Press the ON/OFF button.
Press the HI POWER/ECONO button.
• When the operating mode is AUTO, COOL or HEAT
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
No display
• When the operating mode is DRY or PROGRAM TIMER
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
No display
1
(
HIGH POWER
)(
ECONOMY
) (Normal operation)
(
ECONOMY
) (Normal operation)
Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15
minutes continuously. The remote control
displays and the FAN SPEED display disappears.
• During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating,press the HI POWER/ECONO button again to
cancel the HIGH POWER operation.
• HIGH POWER operation is not available during the DRY
and the program timer operations.
• When HIGH POWER operation is set after ON TIMER
operation, HIGH POWER operation will start from the set
time.
• When the following operations are set, HIGH POWER
operation will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER
operation has started.
• Not operable while the air conditioner is OFF.
• After HI POWER operation, the sound of refrigerant flowing
may be heard.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or
heating. The unit operates 1.5°C higher than the setting temperature during cooling or 2.5°C lower than that during heating. The
remote control
displays and the FAN SPEED display disappears.
NOTE
• It will go into ECONOMY operation at the next time the air-
conditioner runs in the following case.
1
When the air-conditioner is stopped by ON/OFF button
during ECONOMY operation.
2
When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECONOMY operation.
3 When the operation is retrieved from CLEAN or AL-
LERGEN CLEAR operation.
• When the following operations are set, ECONOMY operation
will be canceled.
1 When the HI POWER/ECONO button is pressed
again.
2 When the operation mode is changed DRY to FAN.
• Not operable while the air conditioner is OFF.
NOTE
If the air-conditioner is not operating, point the remote control toward the air conditioner, and
RKW012A401B_EN_001-022 12/08/2010, 13:5814
To Next Page
Loading...
Need help?
General
