Mitsubishi TG-2000A - TG-2000 A Application Installation; Pre-installation Checks and Preparations; TG-2000 A Software Setup Procedure

9
5.1 Pre-installation Steps
Preparing for installation
Before installing the TG-2000A application, do the following checks and preparatory steps.
Steps
Action Details How to
1 Check the OS Check the OS Service Pack version.
• Windows XP Professional
• Windows 2000 Professional: SP2
and above
*
If not the correct version,
refer to the attached
documentation, “Installing
• Windows 2000/XP” and
upgrade the OS.
2 Check the memory
Check that there is at least 128 MB of
RAM (256MB or more is
recommended.)
* If necessary, add more
RAM.
3 Check the HDD free
space
Check that there is at least 2GB of free
space on
the C drive. (OS already set
up)
* Refer to the Windows
instruction manual for
more details.
4 Printer settings
Install the printer driver and check that
printing is possible.
*
For details, refer to the
attached instruction
manual.
5 Set the date and time
In the Windows Control Panel, select
“Date and
Time” and set the date, time
and region
*
For details, refer to the
Windows users manual.
6 Screen size and color
settings
At the “display” in the Windows Control
Panel, set
the screen size to 1024 × 768
or larger and the
color to 65536 colors
(High Color (16-bit)) or more.
*
For details, refer to the
Windows users manual.
7 Automatic login
settings
Check that the Auto log-in is set. *2
* For the setting check pro-
cedure, see Appendix 2
Auto Log-in Check Proce-
dure.
8 Network settings Check tha
t the network settings have
been
performed (even if the adapter is
not connected).
*
For details, refer to the
Windows users manual.
*1 Check when using the printer.
*2 Auto log-in sets the automatic start-up without entering the log-in name or password at the OS
start-up.
5.2 TG-2000A Setup
5.2.1 Setup
The following shows the TG-2000A setup disk (CD-ROM) folder configuration and files. However, it
only describes the files to be run.
CD-ROM drive\Setup\Step1\MSDEInst.bat
\Step2\DbSetup.bat
\Step3\SetupTG.exe
[Reference] CD-ROM directory structure
readme.txt : Directory structure and setup precautions of this CD-ROM
\Setup : Set-up folder
\Tool : Air-conditioning charge calculation support tool (chargecalc.xls)
\Manual : Operation Manual
5. Installation
Note:
• The TG-
2000A will not be started automatically after starting (rebooting) the personal computer
when the TG-2000A is set to Auto reboot, unless the Auto log-in is set. When the TG-
2000A is set
to Auto re-boot, be sure to set the Auto log-in.