Mitsubishi TG-2000A - System and G-50 A Error Codes

77
7106 “System abnormality - Attribute setting error”
7107 “System abnormality - Distributor setting error”
7108 “System abnormality - Ref. system setting error”
7109 “System abnormality - Connection setting error”
7110 “System abnormality - Ref. system connection/connection data unsettled”
7111 “System abnormality - I/O connection equipment not connected/remote controller sensor
abnormality”
7112 “System abnormality - I/O type setting error”
7113 “System abnormality - Equipment unsettled”
7130 “System abnormality - Different unit model error”
7200 “System abnormality - Numeric values unsettled”
7201 “System abnormality - Numeric values unsettled”
(2) System error codes
The following is a list of the error codes and their meaning.
G-50A error
0003 “Communication error”
WHM error
0003 “Communication error”
Note:
• The error codes list all the codes. Error codes that are not displayed with some TG-2000A
systems
are also listed.
Note:
• Displays the man-machine (integrated centralized control software TG-2000A), and G-50A
error
codes by a number up to 4 digits long. The meaning is different from that of the air-
conditioner unit
error codes.