Data cable mounting / dismounting:
Observe anti twist protection when mounting the cable!
Hold the interface cover when dismounting the cable and pull back the ring
The Digimatic interface is compatible with all Mitutoyo devices.
U-WAVE® specifications – see documentation of the U-WAVE® part.
No special drivers are required for using the USB data cable. The instrument is
recognised as a USB keyboard interface (HID).
The measured values will be transmitted directly to Excel or other text or statistic
programs.
After each measured value a separator is sent as an [Enter] command.
U-WAVE®-R-Receiver
Order code: 02AZD810D
(IP67-
Model)
Order code: 02AZD730G
U-WAVE® - Accessories
Compatibility
Installation of interface
To Next Page
Loading...
