To Next PageTo Next PageWhat to do if Mitutoyo Measuring Instruments power does not turn on?
If your Mitutoyo Measuring Instruments' power isn't turning on, first, ensure the batteries are correctly inserted. If you're using an optional AC adapter, check that it's properly connected.
General| Brand | Mitutoyo |
|---|---|
| Model | QM-Height Series |
| Category | Measuring Instruments |
| Language | English |
Introduces the QM-Height High-Precision Digital Height Gauge and lists its available models.
Correlates product names with their specific model numbers for clarity.
Provides crucial disclaimers and guidelines for using the user's manual effectively.
Explains the meaning of safety symbols and warning wording used throughout the manual.
Details conventions for prohibited/mandatory actions and referential information.
Lists critical warnings for safe operation, including electrical hazards and product handling.
Highlights cautions related to battery usage, external voltage, and environmental factors.
Defines product use, handling requirements, and suitable installation environments.
Covers cleaning procedures, power management, and battery/AC adapter use.
Addresses Electromagnetic Compatibility and regulations for product export.
Details EU requirements for exporting products and disposing of electronic equipment.
Explains EU regulations regarding the disposal of waste batteries.
Presents information on the product's compliance with China RoHS hazardous substance restrictions.
Outlines the warranty coverage, exclusions, and conditions for the QM-Height gauge.
Defines the limits of Mitutoyo's liability concerning product use and damages.
Describes the manual's organization, intended readers, and overall purpose.
Details the measuring functions and capabilities of the QM-Height gauge.
Identifies and describes the key components of the QM-Height gauge's main unit.
Explains the function of each button on the display unit's operation panel.
Details the icons, indicators, and display elements of the LCD screen.
Covers the initial steps of turning on the device and moving the probe.
Provides instructions for moving the main unit and using the air-float function.
Guides on setting the absolute measurement reference, including using the surface plate.
Explains how to set the incremental measurement reference.
Details the procedure for setting the ball diameter for accurate measurements.
Step-by-step guide for measuring the height of a workpiece's top and bottom surfaces.
Instructions for measuring step and groove widths of a workpiece.
Procedure for measuring the inner diameter of holes using different termination methods.
Procedure for measuring the outer diameter of cylinders using different termination methods.
Explains how to perform plane scanning measurements for displacement analysis.
Covers methods for determining differences between measurements.
Details how to check the difference between the current and previous measurements.
Explains measuring distances from a reference point to multiple other points.
Describes calculating differences between measurements stored in memory.
Guides on setting tolerance limits for automated acceptability judgments.
Details how to enable or disable the tolerance judgment functionality.
Explains how to register custom measurement sequences for efficiency.
Guides on how to run pre-registered measurement procedures.
Details how to configure automatic or manual termination for scanning measurements.
Explains how to hold measurement results on the display.
Details how to change the display resolution for measurements.
Guides on setting the automatic power-off duration.
Explains how to adjust the duration of the tolerance judgment LED.
Details how to output measurement results to an optional mini printer.
Explains how to connect to a PC for data output using a USB cable.
Provides solutions for typical problems encountered during product use.
Addresses issues related to the display hold function and how to resolve them.
Lists error messages, their causes, and recommended solutions.
Provides instructions for cleaning and maintaining the product.
Lists the fundamental technical specifications of the QM-Height gauge.
Details the data output formats for Digimatic and Digimatic 2.
Describes the connector pinouts and timing charts for Digimatic data output.
Explains the communication settings, data format, and connector for USB output.
Lists all accessories supplied with the QM-Height gauge.
Lists available optional accessories for purchase.
Provides contact information for Mitutoyo service locations across Europe.
Lists Mitutoyo service locations in Italy, Czech Republic, Hungary, Romania, Russia, Finland, and Austria.
Lists Mitutoyo service locations in Singapore, Malaysia, Thailand, Indonesia, Vietnam, and India.
Lists Mitutoyo service locations in Taiwan, South Korea, and various Chinese cities.
Lists Mitutoyo service locations in Mexico, USA, Canada, Brazil, and Argentina.
Details the publication date and revision status of the user manual.
Provides the primary contact information for Mitutoyo Corporation and its EU representative.
