42
3SpecicUsageApplications
No. 99MAF600B
3.3.2 Measuring Using a Registered Measurement Procedure
1
Press 2 times.
» Characters will be displayed in the bottom row of the LCD screen.
2
Press to select [ASSIST] (assist function).
3
Press or to select [RUN], and then press .
» The rst registered measurement will be automatically performed.
4
Make the measurements.
1 Make the rst measurement.
» The rst registered measurement will nish, and then the second registered measurement will be per-
formed.
Tips
• For inner diameter, outer diameter, or plane scanning measurements, press to proceed to the next
registered measurement.
• For details about making measurements,
"2 Basic Measuring Methods" (page 17)
2 Make the subsequent measurements.
» When the 10th measurement is made, all measurements will be nished.
5
To continue measuring press ; to nish measuring press .
To Next Page
Loading...
Need help?
General
