To Next PageTo Next PageWhat to do if Mitutoyo QM-Height QMH-14"AX Measuring Instruments power does not turn on?
If your Mitutoyo Measuring Instruments' power isn't turning on, first, ensure the batteries are correctly inserted. If you're using an optional AC adapter, check that it's properly connected.
General| Model | QM-Height QMH-14"AX |
|---|---|
| Display | LCD |
| Measuring Range | 0-14 inches (0-350 mm) |
| Power Supply | AC adapter |
| Functions | Height measurement, data hold |
| Data Output | RS-232C |
Hazards with medium risk, potentially causing death or serious injury if not avoided.
Guidelines for using and handling the product as a precision instrument.
Explains how to set the origin (ABS) or reference (INC) for height measurements.
Step-by-step guide to setting the surface plate as the origin using the ABS measurement system.
Procedure for setting a position other than the surface plate as the origin, using a gauge block example.
Steps to confirm that the origin has been set correctly.
Guide to setting the reference using the INC measurement system.
Steps to confirm that the reference has been set correctly.
Explains how to measure and set the ball diameter using a calibration block.
Detailed procedure for measuring the inside diameter of a hole using scanning measurement.
Procedure for measuring the outside diameter of a cylinder using scanning measurement.
Details how to measure displacement (max-min) of a flat surface using plane scanning.
Explains how to set tolerance limits and perform GO/NG judgments.
Lists common problems, their causes, and recommended solutions in a table format.
Explains how to interpret and resolve error messages displayed on the LCD.
