Mitutoyo QM-Height QMH-14"AX - Moving the Main Unit

8
1 Before Using This Product
No. 99MAF600B
1.3.2 Moving the Main Unit
Do not move the main unit by grabbing parts other than the base or carrier grip. Doing so can nega-
tivelya󰀨ectmeasurementaccuracyandtheproductitself.
Clean the surface plate in advance. Sliding performance may deteriorate and cause measurement
errors.
■Modelswithouttheair-oatfunction(QMH-350AX,QMX-600AX,
QMH-14"AX, QMH-24"AX)
When moving the main unit on the surface plate, grab the base with your right hand and the carrier grip
with your left hand.
■Modelswiththeair-oatfunction(QMH-350BX,QMX-600BX,QMH-14"BX,
QMH-24"BX)
When moving the main unit on the surface plate, grab the base with your right hand and the carrier grip
with your left hand.
Pressingtheair-oatswitchonthetipofthecarriergripsuppliesairtoraisethemainunit,allowingyou
tomoveitsmoothlyabovethesurfaceplate.However,donotexecuteameasurementwhiletheair-oat
function is active because a measurement error may occur.
A video about moving the
main unit can be viewed.
A video about moving the
main unit can be viewed.