Mitutoyo QM-Height QMH-14"AX - Data Output Specifications; Digimatic Data Output

65
No. 99MAF600B
6Specications
6.2 DataOutputSpecications
6.2.1 Digimatic Data Output
■Data format
●
Digimatic output
d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12 d13
MSD LSD
Unit
mm 0 (0000) inch 1000
(Example) Normal measurement of 0.123 mm
1111 1111 1111 1111 0000 0000 0000 0000 1000 0100 1100 1100 0000
F F F F 0 0 0 1 2 3 3 mm
+
Measurement value
All "F"
(1111)
Sign
+: 0 (0000)
−:8(0001)
Output order
Decimal point
X.X.X.X.X.X.X
3 (1100)
5 (1010)
●
Digimatic 2 output
d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12 d13
MSD LSD
Unit
mm 0 (0000) inch 1000
Measurement value (d3–d4, d6–d11)
F (1111)
Format
Digimatic 2: 8 (0001)
Sign
+: 0 (0000)
−:8(0001)
Output order
Decimal point
X.X.X.X.X.X.X
3 (1100)
5 (1010)
(Example) Normal measurement of 0.123 mm
0001 1111 0000 0000 0000 0000 0000 0000 1000 0100 1010 1010 1000
8 F 0 0 0 0 0 1 2 3 3 mm
+
Tips
• For details about how to set the number of digits of the measurement value to output, see "3.8.2 Out-
putting Data to a Mini Printer (Optional Accessory)" on page 53.
• Seven digits are enabled when the resolution is set to [0.00005 in]. Due to our Digimatic data output
specications,allofthesedigitscannotbeoutputsimultaneously.Generally,thevalueinthe10splace
(the highest value position) will be excluded, and only the remaining six digits will be output. However, it
is possible to change the settings so that the digit with the highest value is output. For details,
"3.8.2
Outputting Data to a Mini Printer (Optional Accessory)" on page 53.