Mitutoyo QM-Height QMH-14"AX - Page 78

64
No. 99MAF600B
6Specications
Storage humidity range 5 %RH–90 %RH (with no condensation)
CE marking EMC Directive EN61326-1
Immunity test requirement: Clause 6.2 Table 2
Emission limit: Class B
RoHS Directive EN50581
*1
The indication accuracy and repeatability indicate the values obtained from the height measurement
ofaatsurfaceusingthesuppliedø5steppedprobe.Formeasuringdiameter,maximum(minimum)
value, displacement, or circular pitch, the measurement accuracy may be greater than the accuracy
ratings listed in the table because, unlike height measurements, the measuring force changes while
scanning measurements are processed.
*2
Perpendicularityindicatesthevaluesobtainedfromthemeasurementofaatsurfaceplacedparallel
with the reference plane of the base by using Mitutoyo's lever head probe (MLH-521) and electronic
micrometer (M-551).
*3
A USB communication driver is required.
It can be downloaded from the Mitutoyo homepage. http://www.mitutoyo.co.jp/global.html
*4
Tousemodelsequippedwiththeair-oatfunction,useasurfaceplateofJIS1Classorabove.Ifthe
surfaceplateisscratchedoruneven,thespeciedperformancemaynotbeachieved.
*5
The AC adapter cannot be used to recharge rechargeable batteries.
*6
The life of the batteries will vary depending on how the product is used.
Recommended nickel-metal hydride batteries: 1,900 mAh or greater capacity
*7
Calculated values assuming about 5 hours of use a day.
*8
Calculated values assuming about 0.5 hours of use a day.
*9
IftheLEDissettobeconstantlylitortheair-oatfunctionwillbefrequentlyused,usinganACadapt-
er (optional accessory) is recommended.