To Next PageTo Next PageWhat to do if Mitutoyo Measuring Instruments power does not turn on?
If your Mitutoyo Measuring Instruments' power isn't turning on, first, ensure the batteries are correctly inserted. If you're using an optional AC adapter, check that it's properly connected.
General| Measuring Range | 0 - 350 mm |
|---|---|
| Resolution | 0.001 mm |
| Display Type | LCD |
| Power Supply | AC adapter |
| Output Interface | RS-232C |
| Operating Temperature | 0 to 40°C |
| Functions | Data output |
| Repeatability | 0.5 µm |
Explains document conventions for safety, actions, and references.
Details critical safety warnings for operation, handling, and environment.
Provides guidance on proper product handling, placement, and maintenance.
Outlines product warranty terms and limits of liability.
Explains the document's context, target audience, and how to read it.
Introduces product capabilities, parts, and basic operations before measurement.
Describes the automatic height measurement and other measurement functions of the product.
Details the main unit and display unit components and their functions.
Covers essential operations like turning power on/off and moving the main unit and probe unit.
Explains setup procedures for origin, reference, and probe diameter before measurement.
Details the procedures for top and bottom surface height measurements.
Guides on measuring the inside diameter of a hole using scanning measurement.
Details the procedure for measuring the outside diameter of a cylinder.
Explains calculating difference between current/previous values or set references.
Details setting tolerance limits and enabling GO/NG judgment for automatic measurement evaluation.
Guides on selecting and outputting measurement values to a mini printer or PC.
Provides solutions for common problems like power issues, battery depletion, and non-functional air-float.
Instructions for daily inspections, cleaning, and proper product storage.
Lists technical details like basic specs, data output, and accessories.
