Mitutoyo QM-Height QMH-350AX - Getting Started; Before Using This Product; Product Capabilities

1
No. 99MAF600B
1 Before Using This Product
1
1 Before Using This Product
This chapter explains the product's characteristics, names and functions of each part of the main unit,
basicoperations,andthesettingsthatmustbeconguredpriortomeasurement.
1.1 Product Capabilities
This product automatically measures the height of the position. Bring the stylus attached to the detec-
tion unit (probe unit) into contact with the workpiece from above or below, and press it against the work-
piece until a beep sound is made.
Besides measuring height, the probe unit itself is constructed for free vertical movement within a set
range, which enables vertical width measurements, the measurement of the inside diameter of a hole
ortheoutsidediameterofacylinderandthemeasurementoftherun-outofaatsurface(maximum,
minimum, displacement) through scanning measurements.
Width measurement Inside diameter mea-
surement of a hole
Outside diameter mea
-
surement of a cylinder
Run-out measurement
ofaatsurface