Mitutoyo QM-Height QMH-350AX - Outputting Measurement Results

52
3SpecicUsageApplications
No. 99MAF600B
3.8 Outputting Measurement Results to an External Device
Data can be output to the mini printer (optional accessory) or sent to the PC in accordance with the
application of the measurement results.
3.8.1 SelectingtheDisplayedValuetoBeOutput
Only the value displayed in either the top (measurement value) or bottom (calculated value) row of the
LCD can be output to an external device as the measurement result.
For details about the value displayed in the bottom row, see "3.1CalculatingtheDi󰀨erencebetween
TwoMeasurementValues"onpage33.
By default, the product is set to output the value displayed in the top row of the LCD. If outputting the
value displayed in the bottom row, perform the following operation to change the setting.
1
Press [MODE].
» An icon will be displayed in the bottom row of the LCD.
2
Press [ZERO ABS] to select [OUTPUT] (output setting).
M1 M2
3
Press [↓] to select the bottom row.
4
Press [ENTER].
» The setup is complete and the regular condition will be
restored.