To Next PageTo Next PageWhat to do if Mitutoyo QM-Height QMH-600BX Measuring Instruments power does not turn on?
If your Mitutoyo Measuring Instruments' power isn't turning on, first, ensure the batteries are correctly inserted. If you're using an optional AC adapter, check that it's properly connected.
General| Measuring Range | 0 - 600 mm |
|---|---|
| Display | LCD |
| Data Output | RS-232C |
| Storage Temperature | -10 to 60°C |
| Resolution | 0.001 mm |
| Accuracy | ±(2.4+2.1L/600) µm |
| Repeatability | 2 µm |
| Power Supply | AC adapter |
| Functions | ABS/INC Measurement, Preset, Data Hold |
| Operating Temperature | 0 to 40°C |
Lists critical warnings to prevent injury, property damage, or product defects.
Terms and conditions of the product warranty and repair.
Details the components and controls of the main measuring unit.
Explains the display screen and its operation panel buttons.
Instructions for powering the device on and off.
Covers essential setup steps before taking measurements.
How to set the measurement origin using ABS or INC systems.
Procedure to calibrate the stylus ball diameter for accurate measurements.
Detailed steps for performing top and bottom surface height measurements.
Method for measuring the internal diameter of a hole using scanning.
Method for measuring the external diameter of a cylinder using scanning.
How to measure surface flatness and displacement using scanning.
Setting tolerance limits and enabling GO/NG judgment.
Procedure to input upper and lower tolerance values.
Connecting to a PC to send measurement data via USB.
Common problems, their causes, and solutions.
Explains error codes and their resolutions.
Lists key technical specifications like range, accuracy, and power.
