Mitutoyo QM-Height QMH-600BX - 3.8.2 Outputting Data to Mini Printer

53
3SpecicUsageApplications
No. 99MAF600B
3.8.2 Outputting Data to a Mini Printer (Optional Accessory)
Connecting the Digimatic mini-processor (DP-1 series, optional accessory) to the Digimatic output
connector of this product will allow you to output measurement results. The measurement results will au-
tomatically be output upon completion of measuring.
Tips
• Measurement results can also be output by pressing the [HOLD DATA] key, but they will not be output
while scanning measurements are performed.
• You can also output measurement results by operating an external device (optional accessory). For de-
tails, see the user's manual for the Digimatic mini-processor.
■Specifying the number of digits of the measurement value to output
You can specify either [out-d1] (Digimatic output) or [out-d2] (Digimatic 2 output) according to the num-
ber of digits that the connected DP-1 series device can accept. Use the following procedures to specify
the number of digits of the measurement value to output.
Tips
[out-d1] (Digimatic output) is the default setting.
1
Press [MODE].
» Characters and icons will be displayed in the bottom row
of the LCD.
2
Press [ZERO ABS] to select [OUTPUT] (output setting).
M1 M2
3
Press [←] or [→].
» The screen for setting the number of digits of the mea-
surement value to output is displayed.