Mitutoyo QM-Height QMH-600BX - 3.8.3 Outputting Data to PC (Windows)

55
3SpecicUsageApplications
No. 99MAF600B
3.8.3 Outputting Data to a PC (Windows Only)
By preparing commercially-available communication software and connecting this product to your Win-
dows PC using a micro USB Type-A cable, you can send measurement results to the PC.
Fordetailsaboutthecommunicationspecications,see
"6.2.2USBDataOutputSpecications"on
page 67.
Tips
Only the value displayed in either the top (measurement value) or bottom (calculated value) row of the LCD
can be output to an external device as the measurement result.
For details about the value displayed in the bottom row, see "3.1CalculatingtheDi󰀨erencebetweenTwo
MeasurementValues"onpage33.
A dedicated communication driver must be installed on the PC to send the data. The system require-
ments for the communication driver are provided below.
Items Operating environment
OS Windows10/Windows8/Windows7/WindowsVista
HDD capacity 500 KB or more
Display 800 x 600 resolution or higher, 256 colors or more
Other Separate communication software is required.
We recommend using the standard USB port on the main unit (the usage of other
USBportsarenoto󰀩ciallysupported).
Internet access is required.
Tips
DatacanalsobesentbyusingaUSBinputtool(optionalaccessory)orU-WAVE(optionalaccessory).For
details, see the user's manual for each product.
■Installing the USB communication driver on your PC
1
Access Mitutoyo's website from your PC to download the USB communication driver for
QM-Height.
http://www.mitutoyo.co.jp/global.html
2
Install the downloaded driver on the PC.
Tips
During installation, use a registered COM port number.