Mitutoyo QM-Height QMH-350AX - Setting the LED Lighting Time

50
3SpecicUsageApplications
No. 99MAF600B
3.7 Setting the LED Lighting Time
Set the time during which the LED is lit for the tolerance judgment.
Tips
• [3 SEc] (3 seconds) is the default setting.
• Ifthebatteriesdepletequickly,youcansettheLEDlightingtoo󰀨.
1
Press [MODE] twice.
» Characters will be displayed in the bottom row of the
LCD.
2
Press [Scanning measurement] to select [POWER SET] (power setting).
M1 M2
3
Press [←] or [→].
» The screen for setting how long the LED is lit is dis-
played.
4
Press [↑] or [↓] to select the length of time for the LED to be lit.
» If [ALL] is selected
Setting Details
[3 SEc] Lights for 3 seconds.
[ALL] Stays continuously lit.
[oFF] Turnso󰀨thelight.