Mitutoyo QM-Height QMH-14"AX - Handling Error Messages

43
3SpecicUsageApplications
No. 99MAF600B
3.2.2 Enabling/Disabling the Judgment Function
1
Press [MODE].
» Characters and icons will be displayed in the bottom row
of the LCD.
2
Press [Inside diameter measurement] to select [TOL.] (tolerance setting).
M1 M2
» [U] and the current upper tolerance limit will be displayed
on the LCD.
3
Press[↓].
4
Press[←]or[→]andselect[toL.on](enabled)or[toL.oFF](disabled).
5
Press [ENTER].
» Theselectionwillbenalized.
6
Press [CANCEL].
» The regular condition will be restored.