Mitutoyo QM-Height QMH-14"AX - Confirming Set Reference

17
2 Basic Measuring Methods
No. 99MAF600B
3
Conrmthesetreference.
1 Slowly move the stylus away from the reference, and bring them into contact again by turning the probe unit
up/down wheel until a "beep" sound is made.
2 Check that [0.000] is displayed in the bottom row of the LCD (the reference setup is complete).
Tips
Ifthereferenceissignicantlydi󰀨erentfrom[0.000],performsteps 1 through 3 again.