- 14 -
PARAMETER
IMPORTANT
◆ Set MP in action mode.
◆ Even if you do not perform statistical calculations, data processing axis should
still be set.
NOTE
◆ If the parameter is cleared, it is set to the default, except date and time.
◆ If the parameter is cleared, date and time is reset to 2001/1/1, 0:0
◆ Unit information is not sent out from the linear scale counter. So, if the unit is
not set, the unit is not printed in the data.
◆ It’s possible to connect with K series counter only.
To Next Page