- 5 -
SET UP
NOTE
◆ DP-1VR has no charger function. If you need to charge the batteries, a
dedicated battery charger is needed.
◆ Battery life is about 10,000 lines, (using 1,600 m Ah Ni-MH, and print large,
letter one time per 5 sec.)
◆ Battery life varies drastically in accordance with environmental conditions.
1.2 Connection of the AC adapter
Connect the AC adapter to the DP-1VR.
Skip this page when using batteries.
POWER
POWER
−
NG
PRINTER CL
CESTAT
FEED DATA
TOL.
LIMIT
GO
+
NG
DIGIMATIC MINI-PROCESSOR
Insert firmly all the way.
◆ The AC adapter specified by our company should be used.
100/115V 09EAA088
230V 09EAA088D
230V UK 09EAA088E
◆ If the specified AC adapters are not used, print quality and life expectancy will
be reduced.
To Next Page
Loading...
Need help?
General