Mitutoyo DP-1VR - Confirmation;Renew of Limit Data

- 27 -
OPERATION
● Confirmation and reset of limit
data. If limit data is not input or it
is cleared by the 'CL' key, the
operation is possible.
Tolerance limit data is renewed by
'STAT'.
Press the 'TOL.LIMIT' key, for the
required tolerance limit data.
Renewed limit data is obtained.
TOL.LIMIT
STAT
STAT
STAT
TOL.LIMIT
LIMIT MODE*
*LIMIT DATA 2*
LSL 12.36 mm
USL 25.67 mm
TOL 13.31 mm
*LIMIT DATA 3*
LSL 12.56 mm
USL 25.89 mm
TOL 13.33 mm
*LIMIT DATA 4*
* NO LIMIT DATA *
*LIMIT DATA 5*
LSL 12.36 mm
USL 25.67 mm
TOL 13.31 mm
*NEW LIMIT DATA*
*LIMIT DATA 5*
DATE 2000/ 2/ 2
TIME 13: 35
LSL 12.36 mm
USL 25.67 mm
TOL 13.31 mm
3.2 Confirmation/reset of the limit data
The operation of confirming contents of 5 of tolerance limit data and resetting
tolerance limit data to use.