9
1 Before Using This Product
No. 99MAF029B
NOTE
If air-float does not work:
• If
is shown on the LCD screen, the air-float function cannot be used. Replace the batteries
with new ones.
• Use a flathead screwdriver to turn the air-float adjustment screw, and adjust the airflow. Turning the
screw right increases airflow, and turning it left reduces airflow. Adjust the amount relative to the
installation location.
Air-float
adjustment screw
The airflow has been adjusted to provide optimal performance before shipment. We recommend
using the default settings as much as possible.
NOTE
When adjusting the air-float flow:
• Due to the characteristics of the air-float mechanism, variations in airflow may cause the main unit
to vibrate. In this case, reduce the airflow.
• If you adjust the airflow, make sure that the friction between the surface plate and the main unit is
reduced before use.
To Next Page
Loading...
