How it works (electric and gas)
Mixergy electric and gas powered tanks use novel top-up technology to ‘oat’
hot water on top of cold. This means you can selectively ‘heat what you need’,
rather than the whole tank. A sensor within the tank ensures you’ll always know
how much hot water is available. Top-up reduces heat losses and improves
reheat speed from cold (5x for electric, 2x for gas). This helps save money, time
and energy.
How it works (heat pumps)
Mixergy heat pump tanks heat using an external heat exchanger and
circulating pump to heat the full contents of the tank from the bottom up
evenly via convection. This has the benet of improving the eciency of the
heat pump (while heating hot water) by up to 8% and can increase the amount
of hot water stored by the tank by up to 20% in some cases.
Mixergy
tank
Conventional
tank
Mixergy heat
pump tank
Conventional
coil heat pump
tank
3
To Next Page
Loading...
