Automatic schedule control
It can be tricky to know exactly how much hot water you’ll require on a
daily basis, and that’s why we’ve produced an intelligent machine learning
algorithm, which will select the best possible heating schedule for you. This
algorithm will optimise your energy use, so you’re always saving as much
money on hot water bills as you can. It’s a win-win situation for you, and our
planet!
Automatic control can be set to one of two modes:
1. Standard: your tank will heat conservatively, aiming to save some
money whilst minimising the chance that you’ll run out of hot water.
2. Economy: your tank will heat to maximise savings. This comes
with an increased risk that you may run out of hot water if your
household uses more than estimated.
Before the machine learning kicks in, your actual hot water usage will be
monitored over a short period. You should either set a manual schedule
yourself to begin with, or your tank will run a default schedule – heating to
100% at 3am.
* Friendly disclaimer – scheduling is trying to predict water usage
happening in the future. Therefore no manual or automated schedule
will ever perfectly predict the exact amount of hot water you’ll actually
need, though we hope our suggestions and automatic heating control
setting will do a pretty good job!
8
To Next Page
Loading...
