FX312 & FX412 VERSION 2.0
58
MOB function = A single press on the MARK/MOB key is sufficient to activate the MAN OVER
BOARD function (MOB).
MARK and MOB function = A single press activates the MARK (EVENT / WAYPOINT) function
and at least three presses activate the MAN OVER BOARD function (MOB).
7.1.8
–
KEYPAD BLEEP
From the SYSTEM MENU, press key
7 (or select 7-KEYPAD BLEEP and press
Enter
). Use the
arrow keys to select the mode required and press
Enter
.
Select active to activate the keypad bleep function, the receiver will now bleep with every key
press.
7.1.9
–
DATA INPUT / DATA OUTPUT (NMEA)
From the SYSTEM MENU, press key
8
(or select 8-INPUT/OUTPUT and press
Enter
). Use the
arrow keys to move the cursor in the options window. Use the
arrow keys to select
the required conf
igurations and the press
Enter
to confirm.
To Next Page
Loading...
