Your GPS has a data input and a data output to communicate with the other equipment. The
data input is used to receive differential correction or loading waypoints and routes from a
P.C.
The data output is used to transmit the position, navigation information, waypoints and routes to
a: P.C., automatic pilot, plotter and radar.
Your receiver allows you to select the NMEA sentences to be transmitted. To de-select a
sentence select 4
dashes (
- - - -
).
You will find specifications of the different formats of communication in ANNEXE 1.
Advice: To use your receiver with PMS WAYPOINTS & ROUTES software for downloading
waypoints and routes to a PC, select the format WPTS + RTES for the data output. Select the
format CHART OUTLINE to download a chart outline from your receiver to the PC and select
the format TRACK to download the track from your receiver to the PC. To load datas from a PC,
make sure the NMEA183 is selected for the serial i
nput.
To Next Page
Loading...
