Operation ML30, ML40
14
6.5 Connecting the refrigerator
A
➤ Plug the earthed plug into a properly installed safety plug socket.
7 Operation
A
I
7.1 Energy saving tips
Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the cooling device
to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
NOTICE!
Check that the voltage specification on the type plate is the same
as that of the power supply.
NOTICE!
Ensure that the objects placed in the refrigerator are suitable for
cooling to the selected temperature.
NOTE
Before starting your new refrigerator for the first time, you must
clean it inside and outside with a damp cloth for hygienic reasons
(see also
ML30-ML40-O-16s.book Seite 14 Freitag, 28. April 2017 12:02 12
To Next Page
Loading...
