Attaching the QWERTY Keyboard
The
QW
ERTY keyboard is attachable directly to the xTablet T7000 unit using a coin or a flat-blade screwdriver.
Tools Required
•
Phillips screwdriver
To attach the keyboard to the xTablet T7000
1. Align the screws on the top of the
QW
ERTY
keyboard ……with the holes in the bottom of the xTablet T7000.
2. Turn the screws on the bottom of the
QW
ERTY keyboard into the xTablet T7000 until tightly secure.
Using the QWERTY Keyboard Module with the MobileDemand xTablet T7000 Office
Dock
Note: If you want to dock the xTablet T7000 with a QWERTY
keyboard attached using a T7000
Office Dock, see the T7000 Office Dock and Extension
Instructions for instructions how to adjust the height of the
locking mechanism.
To Next Page
Loading...
