Mocon Dansensor Lippke 4000 - Troubleshooting Guide; System Errors; Interface Errors

P/N 330654-E 01/2018 COPYRIGHT © Dansensor A/S
68 User Guide EN Lippke 4000/4500
Maintenance
Filter
The filter foam material  in the optional filter should be replaced at regular intervals or if it is soiled.
O-rings
The O-rings  for the filter, needles and test heads guarantee tightness and functioning of the system
and must therefore be replaced periodically.
Applying some silicone grease on the O-rings may prolong their service life and durability and may
increase system tightness.
CAUTION! Do not use mineral grease for the O-rings.
1
2