Need help?Do you have a question about the Mocon AMETEK Dansensor Lippke 5000 and is the answer not in the manual?
Covers manual purpose, safety guidelines, and important notes.
Explains the system, its capabilities, and device components.
Lists supplied parts, accessory kits, and specialized adapters.
Overview and guides for various test types like Burst, Leak, Creep, etc.
Instructions for setup, operation, interface, and basic functions.
Procedures for cleaning and maintaining the device and its components.
Explains menu structure, navigation, and settings configuration.
Covers user login, administration, PIN codes, and access levels.
Details mechanical, electrical, connectivity, and basic specifications.
Information on PC software, air supply, and accessory dimensions.
Lists consumables, accessories, and options with part numbers.
Comprehensive safety, handling, and environmental guidelines.
Covers manual purpose, safety guidelines, and important notes.
Explains the system, its capabilities, and device components.
Lists supplied parts, accessory kits, and specialized adapters.
Overview and guides for various test types like Burst, Leak, Creep, etc.
Instructions for setup, operation, interface, and basic functions.
Procedures for cleaning and maintaining the device and its components.
Explains menu structure, navigation, and settings configuration.
Covers user login, administration, PIN codes, and access levels.
Details mechanical, electrical, connectivity, and basic specifications.
Information on PC software, air supply, and accessory dimensions.
Lists consumables, accessories, and options with part numbers.
Comprehensive safety, handling, and environmental guidelines.
General| Burst Test | Yes |
|---|---|
| Creep Test | Yes |
| Creep-to-Failure Test | Yes |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Test Media | Air |
| Standards Compliance | ASTM F2095 |
| Temperature Range | 10°C to 40°C |
| Humidity Range | 10% to 80% RH, non-condensing |
| Test Gas | Air or other non-corrosive gases |
| Resolution | 0.1 mbar |
| Sample Size | Varies depending on the sample holder and application |
| Weight | Approx. 25 kg |
To Next Page
