Mocon AMETEK Dansensor Lippke 5000 - Tube Adapter

Dansensor® Lippke® 5000 EN User Guide 31
P/N 380419-C
05/2022
Tube adapter
A tube adapter can be used to test tubes with threaded closures.
As there is a large number of tubes with different types of threads (X), the adapter should
normally be custom made for the specific type of tube.
The illustration shows how an adapter  can be used to connect the tube  to the test head
. We recommend to use a rubber gasket  (1.5 - 2 mm thick) to ensure optimal tightness.
The illustration shows the dimensions required for the adapter to fit on the test head.
If you need further information, do not hesitate to contact MOCON Europe A/S.
NN
NN
NN
NN
NN
NJONN
.YNN
NJONN
.YNN
9
9
¡



