Mocon AMETEK Dansensor Lippke 5000 - Testing; Selecting a Test Definition

74 User Guide EN Dansensor® Lippke® 5000
P/N 380419-C
05/2022
Testing
Selecting a Test definition
1. In the test screen....
... tap the icon in the top left corner. This will bring up the Test Definition Type
screen. This screen can also be reached by tapping the icon in the bottom right corner
to go to the Main Menu, and then selecting Workflow -> Test Definitions ->
Select (as active).
NOTE! Only Burst and Leak tests are available by default. The other test types
can be purchased as an option - see "Consumables, accessories and options" on
page 127.
2. Select the appropriate type of test ex. Burst.
3. The Select Test Definition screen lists all the Burst test definitions in last used order.
Orange text indicates that the currently selected test definition is from this group.
4. Use and keys to scroll through the list to find the appropriate test definition.
NOTE! If you have a large number of test definitions, scrolling through the list
may be quite time consuming. In this case you can use the “Find” and “Filter”
functions - see
"Find and Filter" on page 93 for details.