106 User Guide EN Dansensor® Lippke® 5000
P/N 380419-C
05/2022
Collected data
Selecting Collected data from the Test Log menu will display a list of the logged
measurement data for the selected test definition.
The list shows the following information about each log:
Number of log entries for the selected test definition
Log date
Log time
Test result
The colored symbols indicate the following:
Comments
Comments are attached to the measurement, either via custom fields or as a comment
on an invalid measurement.
All custom field entries and comments are exported together with the log data.
The logged data can be exported - see "Export" on page 116 for details.
Data logging via a local network is also possible - see "Network Logging" on page 119 for
details.
PASS - the test result is within the set limit values.
Test is a valid test.
FAIL - the test result is outside the set limit values.
Test is a valid test.
The test has been marked as invalid or an error occurred during the test.
To Next Page
